D-26F: NON-PROGRAMMABLE DIGITAL THERMOSTAT FOR RADIANT FLOOR HEATING

D-26F digital thermostat is specifically designed for Radiant Floor Heating Systems. It is very simple to install and operate without any programming steps. A 10 ft. auxiliary remote sensor is provided to measure and control the slab temperature. In addition, an ON/OFF switch can be used to turn off the relay output. Setpoint and floor temperature or room temperature is displayed on the LCD screen with backlit.

FEATURES:

• Large LCD with backlighting for displaying Setpoint & Floor Temperature or Room Temperature
• Slab Temperature Control for Radiant Floor Heating Systems
• Low Voltage (24 VAC) System
• Reliable Digital Electronic Accuracy
• No Leveling Required
• Contains NO Mercury, environmentally safe
• Only 2 wires needed to power thermostat, no need to change battery in the future
• Selectable display in °F or °C
• EEPROM for setting backup
• ON/OFF switch to shut off relay output
• Built-in Digital Control System
• Supplied with 10ft. floor sensor

SPECIFICATIONS:

• Display Format: Liquid Crystal Display(LCD) with Backlighting
• Floor Temperature Control Range: 41-122°F(5-50°C)
• Temperature Display Range: 32-140°F(0-60°C)
• Contact Rating: 16A 
• Power Supply: 24 Vac, 50-60Hz
• Sampling Rate: 1 Minute
• Accuracy: ±1°F
• Switching Differential: 0.5/1.0/1.5/2.0 °F/°C 
• Dimension: 91.5 x 80.3 x 30 mm
• Resolution: 0.1°F

Please click to go to Azel's product page for brochure and wiring diagram